SAEVO EVUS 8, Руководство пользователя

Страница: 101 / 150

91
9
Using 4D
4D imaging enables the display of real time 3D anatomical structures.
4D imaging can only be performed by compatible volume probes. 4D imaging adds the dimension of “movement” to a 3D
image by providing continuous, real-time displays of internal organs or fetus. 3D imaging provides single frame images, while
4D imaging provides continuous, high volume acquisition of 3D images.
The following description uses the fetal imaging as an example, the other imaging options are as the same.
9�1 Acquiring 4D Images
The following description uses 4D imaging performed by the VC6-2 probe as an example.
9�1�1 Entering the Real-Time 4D Imaging
Perform the following steps as follows.
1. Enter the patient information, select the VC6-2 probe and an exam type (such as the obstetric exam used
throughout this chapter) to enter the B mode.
2. Optimize imaging parameters in the B mode.
3. Apply adequate gel on the patient.
4. Acquire a high quality B-mode image.
5. Select the
3D/4D key on the control panel to enter the inactivated 4D mode.
The 2D imaging with a ROI and a sample line is displayed in the inactivated 4D mode, only the data in the ROI
is acquired for 4D imaging.
ROI
Sample Line
Sample Volume
Anchor
2D Imaging
FPS 47
D/G 3/1
GN 255
I/P 3/30
PWR 70
FRQ 3-4.8
D 16.5cm
Angle 4
Status Icon
Figure 9-1 Inactivated 4D Imaging Screen
6. Adjust the ROI and sample line.
You can select the
Set
or
Update
key to highlight the desired status icon.
− If is highlighted, use the trackball to position the ROI.