Rae MultiRAE PLUS PGM-50, Руководство по эксплуатации и обслуживанию

Страница: 90 / 184

PROGRAMMING OF MULTIRAE
4 - 41
5. The display shows “Save new gas?”. To confirm the new
gas, press the [Y/+] key to accept the change. Press the
[N/-] key or the [MODE] key to discard the change and
move to the next step.
6. Display shows
TOX1 VOC TOX2
methane
LELFactor=1.00 ?
LEL OXY
where “1.00” is the calculated correction factor of the
selected gas in Step 4.
7. If the user does not want to modify the LEL correction
factor, press [Y/+] key and go to Step 8. To modify this
factor, press [N/-] key first. Then starting from the left-
most digit, use the [Y/+] or [N/-] key to change the digit
value and press the [MODE] key momentarily to advance
to the next digit. The flashing digit will move on to next
digit to its right. Repeat this process until all 4 digits of
the new factor are entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode. If there is any
change to the existing value, the display shows “Save ?”
Press the
[Y/+] key to accept the new value and exit the
gas selection sub-menu. Press the [N/-] key to discard
the changes.