Rae MultiRAE PLUS PGM-50, Руководство по эксплуатации и обслуживанию

Страница: 117 / 184

COMPUTER INTERFACE FOR MULTIRAE PLUS
5 - 21
5.5.2 Send Configuration to MultiRAE Plus
After the configuration data is loaded into the ProRAE-Suite
software, the user can send the configuration settings to the
MultiRAE PLUS monitor. To send the configuration
settings to the instrument, click
Communication->Send
Config menu item or click the send toolbar icon (right
arrow with “Send” letters), a message box will appear to
remind the user to connect the instrument to the PC through
the serial port. After making sure that the instrument is
connected to the PC, click the
OK button to start the data
transfer.
After the configuration information is sent successfully, a
message box will appear to indicate that the sending
configuration process is completed. Click the
OK
button to
close the message box.
If the communication is not successful, an error message
indicating that there is no response from the instrument will
appear. Check the cable to make sure that the connectors on
both ends of the cable are securely seated in the sockets.
Try to send the information again. If the error message still
appears after repeated attempts, call an authorized service
center for help.