OPERATION OF MULTIRAE PLUS
2 - 6
The Multi-gas Monitor includes a 2-line, 16-digit dot matrix
LCD display. The LCD shows the following eight types of
displays during normal operation if the [MODE] key is
pressed:
•
Real time instantaneous gas concentration in ppm for
toxic and VOC gases, % by volume for oxygen and %
LEL for combustible gases.
•
Sensor names.
•
Peak and minimum gas concentration for toxic, VOC,
oxygen and combustible gases.
•
15 minute Short Term Exposure Level (STEL) values
of the toxic and VOC gases in ppm and 8 hours Time
Weighted Average (TWA) .
•
Battery voltage and shut off voltage in volts.
•
Real time clock, run time and temperature.
•
Datalogging mode or “Start / Stop Datalog?” menu to
enable/disable datalogging if manual datalogging
mode is selected.
•
LEL or VOC gas names (if the LEL and VOC sensor
are installed).
•
“Print Reading?” menu to print the reading to the
RAE Printer.
•
“Communicate with PC?” menu to send or receive
data between PC and the MultiRAE PLUS monitor.
Содержание MultiRAE PLUS PGM-50
Страница 165: ...APPENDIX A A 2 Change LEL VOC Gas Selection Enable Disable Sensor Change Dilution Ratio Change PID Lamp Type N Y Mode N...
Страница 169: ...APPENDIX B B 4 sensitivity to the gas is higher than that of isobutylene VOC or methane LEL...
Страница 176: ...APPENDIX C C 7...
Страница 183: ...APPENDIX G G 2 RAE Systems Service Department...