PROGRAMMING OF MULTIRAE
4 - 23
4.6.1 Reset Peak and Minimum
This function will reset peak and minimum data stored in the
non-volatile data memory.
1. “Reset Peak and Minimum?” is the first sub-menu item
in Table 4.5.
2. Press the
[Y/+]
key to clear the peak and minimum data
memory. Display shows “Are You Sure?” to re-confirm
whether to reset peak and minimum data.
3. Press the
[Y/+]
key again will reset peak and minimum
data.
4. Press the
[N/-]
or
[MODE]
key to exit without resetting
the data and move to next datalog sub-menu.
Note: STEL and TWA (or AVG) value will not be affected
when peak and minimum values are reset.
Содержание MultiRAE PLUS PGM-50
Страница 165: ...APPENDIX A A 2 Change LEL VOC Gas Selection Enable Disable Sensor Change Dilution Ratio Change PID Lamp Type N Y Mode N...
Страница 169: ...APPENDIX B B 4 sensitivity to the gas is higher than that of isobutylene VOC or methane LEL...
Страница 176: ...APPENDIX C C 7...
Страница 183: ...APPENDIX G G 2 RAE Systems Service Department...
