Rae MultiRAE PLUS PGM-50, Руководство по эксплуатации и обслуживанию

Страница: 24 / 184

OPERATION OF MULTIRAE PLUS
2 - 8
Turning off the Multi-gas monitor with the AC charger in
place will result in a display of “Charging..” or “Battery
Charged” and indication of battery voltage. This indicates
that the monitor is off, but the smart charger circuit is now
active.
To turn the unit on from the charge or discharge mode, press
the
[MODE] key.
Data protection during power off
When the monitor is turned off, all the current real time data
including TWA, STEL, Peak and elapsed time are erased.
However, the datalog data is preserved in non-volatile
memory. Even if the battery is disconnected, the datalog
data will not be lost. During the power off period, the real
time clock will continue to operate until the battery is
completely drained (usually in 5-7 days without any
charging). If the battery is completely drained or is
disconnected from the monitor for more than 30 minutes,
the real time clock will be lost. In this case, users need to
enter the real time clock information again, as described in
Section 4.