Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 75 / 180

16 ORIENTATION
User’s manual Planmeca Chairside CAD/CAM solution 69
16.3 Moving the central point
The central point of the orientation circle is the middle of
the screen, which may or may not be the location of your
prep. If the central point is not on your preparation, it can
be a little confusing when rotating the model.
It is not necessary to centre the model on the preparation,
but it can be helpful if you are new to rotating a 3D model
or if you have multiple preparations. The example below
shows a preparation with no distal neighbour, so the prep
is not in the middle of the screen.
To move the model so that your preparation is centred,
hold down the mouse scroll wheel and move the model.
The circle graphic moves with the model, but you can see
the model moving in relation to the tabs at the top of the
screen.
When the scroll wheel is released, the circle graphic
refreshes and moves to the centre. Repeat as necessary.