Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 142 / 180

28 MILLING UNIT
136 Planmeca Chairside CAD/CAM solution User’s manual
When lifting the milling unit:
7. To lift the mill stand close to the mill with feet
approximately shoulder width apart, and one foot slightly
in front of the other for optimal balance.
8. Squat down by bending from the knees, NOT from the
waist, keeping their backs as vertical as possible.
9. Firmly grasp the mill before beginning to lift.
NOTE
Be certain to lift the mill by the underside metal framework,
not by the plastic housing.
10.Refrain from twisting your body and slowly begin lifting,
using the legs, not the back, to lift.
11.Keep the mill as close to your body as possible to
minimize stress on the back.
12.If turning is required, turn by shuffling your feet, not by
twisting their body.
13.If it is necessary to place the mill below the level of the
waist. Each person lifting should follow these procedures
in reverse order, keeping their back vertical and bending
from the knees.
14.Be careful to not to collide with anything.
28.5 System information and upgrades
28.5.1 Software and hardware
System software and hardware upgrades are initiated
through Planmeca only. No software or hardware should
be added or deleted to/from the Planmeca systems
without prior approval of Planmeca. Doing so may result
in damage to the system and will void the product
warranty.
28.5.2 Job server software version
The version of software on the job server will not be
accessible without keyboard and monitor. If there is a
question on the version of software, please contact a
customer support representative.