Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 154 / 180

29 CLEANING / PREVENTIVE MAINTENANCE
148 Planmeca Chairside CAD/CAM solution User’s manual
1. Using a clean, non-woven sponge that has been
saturated with a hospital grade, TB-rated germicide or
pre-moistened germicidal cloths, apply the germicide to
the entire surface of the scanner base, scanner holder,
mouse, mouse-pad, and any other surfaces that you
touch that were not covered by a disposable barrier. Do
not spray the germicide directly on the items and do not
submerge the scanner or mouse in the germicide.
2. Follow the germicide manufacturer’s instructions.
29.3 Milling unit maintenance
Cleaning cycle: High volume offices should clean daily.
Most offices will need to clean weekly.
NOTE
The mill must be cleaned more often when e.max or
zirconia blocks are used.
Cleaning the chamber and replacing milling fluid are
required to ensure proper operation of the mill.
WARNING
Operating the milling unit with insufficient milling fluid
will damage the mill, void your warranty, and destroy
the restoration that is being milled.
Personal injury from the milling unit overheating may
result from inadequate milling fluid.
29.4 Cleaning fluid tank
When the tank is scheduled to be cleaned the Clean Fluid
Tank button turns red. Use this tool to see how many
milling hours are estimated before the tank needs to be
cleaned.
1. Touch and hold down the Clean Fluid Tank button.
2. A message appears and shows the number of hours
remaining before a scheduled cleaning is needed. Touch
Yes to continue.
3. Follow the on-screen instructions for opening the drawer
and removing the tank.
4. Rinse the tank and the strainer basket to remove any
ceramic residue.
5. Add 3,8 litres of water (1 gal) and 2 dl (6 oz) of fresh
milling coolant to the tank.
NOTE
Milling coolant must be used or the warranty will be void.
6. Remove and clean the strainer when prompted by the on-
screen instructions.