Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 89 / 180

17 MARGIN
User’s manual Planmeca Chairside CAD/CAM solution 83
Assigned tooth number (for multiple restorations)
On multiple restoration cases, the tooth number is
assigned to each preparation when the margin is drawn.
1. Click the desired tooth number tab.
2. Draw and edit the margin for the selected tooth number.
3. Select the next tooth number.
4. Draw and edit the margin for the selected tooth number.
Drawing the margins is how the tooth number is
designated for each preparation.
If the wrong tooth number is selected when a margin is
drawn, the margin must be marked again on the correct
tooth tab.
NOTE
See section 20 “BRIDGES” on page 104 on how to draw
pontic margins.
17.5 Margin tab settings
17.5.1 ICE margin mode
NOTE
For intraoral cases only.
ICE Margin Mode determines which view the system uses
to create the margin curve when using the Lasso tool.
1. Click Settings.
2. Click ICE Margin Mode.
The default setting,
Normal
, means that the system uses
both the stone and ICE view to determine where the
Lasso line should appear.
3. Select
Texture only
to indicate that the system should
ignore the stone model and focus on the differences in the
ICE view. If View ICE Preparation is deactivated, this
setting returns to Normal mode.
4. Click Save to save the changes or Cancel to exit without
saving.