Planmeca Chairside PlanCAD Easy Скачать руководство пользователя страница 44

Страница: 44 / 180

14 USING SCANNER

38 Planmeca Chairside CAD/CAM solution

User’s manual

14 USING SCANNER

NOTE

This section does not apply to cases that are imported

from another scanning system.

The scanner captures the restoration site with a laser

system and delivers live images to the screen. As you

take multiple snapshots, the system creates a composite

image of the restoration site, revealing any areas that

need further scanning.

14.1 Connecting the scanner to the laptop

NOTE

On upgraded Planmeca PlanCAD Easy carts, the scanner

connector plugs directly into a new port on the Planmeca

PlanCAD Easy cart.

Properly connecting and disconnecting the scanner will

prevent damage to your devices.

1. Attach the connector of the scanner into the adapter as

illustrated.

2. Make sure the end is fully seated and a confirmation

sound has been given from the Planmeca PlanCAD Easy.

14.2 Disconnecting the scanner

When removing the scanner, hold the scanner connector

with one hand and the adapter with the other hand. Gently

pull them apart to disconnect. Leave the adapter attached

to the computer.

14.3 Scanner indicator lights

The LED lights on the scanner button can be read as

follows:

• Green - Ready for use. Scanner is connected, but not

actively scanning.

• Blue - Laser ON. Scanner is actively scanning.

If scanner light is not illuminated, the scanner is not ready

or it is not connected.

Содержание Chairside PlanCAD Easy





















































































































































































Результаты поиска

Содержание Chairside PlanCAD Easy

Отзывы:

Похожие инструкции для Chairside PlanCAD Easy

Бренды по названию

Популярные бренды

Planmeca Chairside PlanCAD Easy, Руководство пользователя

Результаты поиска

Содержание Chairside PlanCAD Easy

Отзывы:

Похожие инструкции для Chairside PlanCAD Easy

Бренды по названию

Популярные бренды