Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 117 / 180

21 SETTINGS
User’s manual Planmeca Chairside CAD/CAM solution 111
21.2 Reset warnings
You can select the option
Do not show these messages
again
. If a new operator is using the system, you may
want to reactivate these warnings.
21.3 Sprue angle method
(For mill systems)
When the default setting
Tooth Specific
is selected the
sprue is in the most commonly recommended position for
the selected type of restoration.
When selecting
Optimized
the placement is based on the
fastest milling time. In all cases, the sprue can be
manually moved on the
Mill
tab.
21.4 Margin ramp
(For design systems)
Default: 0.25
Default setting for the margin ramp incline. Use the slider
or type a number in the box to change the setting.
Increasing the Margin Ramp decreases the space
between the restoration and preparation at the shoulder.
Decreasing the Margin Ramp increases this space.
21.5 Spacer thickness
(For design systems)
The default setting for the space between the preparation
and the restoration:
• Top: 0.1
• Sides: 0.1