Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 146 / 180

28 MILLING UNIT
140 Planmeca Chairside CAD/CAM solution User’s manual
28.10 Starting the milling
Milling is an automated process that varies in length of
time based on the restoration data.
1. After inserting the block, close the lid and wait for the lid
lights to turn green.
The system checks the positioning of the block and
begins generating the tool-path.
Wait for the tool-path to be generated and then see the
milling time in the
Time Remaining
field.
NOTE
See the Troubleshooting section for assistance if you
experience a problem generating a tool path or if the mill
times out.
After the milling process is complete, the lid automatically
opens.
2. Remove the restoration and any debris and close the lid.
28.11 Parked job
When a job is interrupted by an error message or a
manual cancellation of the job, it is saved in Parked Job.
Only the most recent job is available in Parked Job.
NOTE
Jobs interrupted by a power failure are not parked.
When a job has been saved, the Parked Job icon will
appear on the top right corner of the screen.
1. To restart the interrupted job, touch Parked Job.
2. Touch Select.
3. Reinsert the partially milled block if it had been removed.
NOTE
Do NOT insert a new block for a Parked Job. A new block
will result in broken tools. To restart the job with a new
block, use Pending jobs.
4. Follow the on-screen instructions.
The milling restarts from where it was cancelled.