Planmeca Chairside PlanCAD Easy Скачать руководство пользователя страница 149

Страница: 149 / 180

28 MILLING UNIT

User’s manual

Planmeca Chairside CAD/CAM solution 143

28.14.2 Replacing/inserting tools

If a needed tool is not already in the tool changer, the

following message will appear.
The reasons for replacing a tool include:

• Tool(s) needed for the restoration are not in the tool

changer.

• Fill empty slots in tool changer.
• Tool in spindle is broken.
• Tool is too worn down to use.
1. On the Home screen Select Maintenance. The Mill

Options menu appears.

2. Select Replace tools by touching the screen or using the

up/down arrows and touch Select.
The

Replace tools

screen appears. In the example below,

there is a tool in each spindle, three extras in the tool

changer, and one empty slot (green outline).
There are two vacant places shown in the tool changer

that do not have the green outline. The tools in the

spindles will be placed there when they are being

exchanged for another tool in the changer.

3. Touch the desired tool or empty slot.

The tool or empty slot changes colour when selected. The

bottom of the screen details the position, diameter, and

elapsed time of the selected item. The tools are colour

coded to match the legend at the bottom of the screen.

4. Touch Select.

5. Select the shape of the new tool or touch Empty to

remove the tool without a replacement.

Empty tool

Coloured

stripes represent

tool shape

Old tool

Worn tool

Broken tool

Содержание Chairside PlanCAD Easy





















































































































































































Результаты поиска

Содержание Chairside PlanCAD Easy

Отзывы:

Похожие инструкции для Chairside PlanCAD Easy

Бренды по названию

Популярные бренды

Planmeca Chairside PlanCAD Easy, Руководство пользователя

Результаты поиска

Содержание Chairside PlanCAD Easy

Отзывы:

Похожие инструкции для Chairside PlanCAD Easy

Бренды по названию

Популярные бренды