Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 47 / 180

15 SCANNING
User’s manual Planmeca Chairside CAD/CAM solution 41
15.1.2 Accuracy optimization slider
Use the slider to adjust the scanner accuracy according to
the current scanning type.
• Move the slider to the left for scanning small details and
body scan scanning.
• Move the slider to the right for full arch and basic
scanning.
15.1.3 Model editing tools
Eraser tool
Use this tool to remove unnecessary data like extra teeth,
tongue, cheek, etc. of the scanned model. The tool can
also be used to erase a misalignment or a part of the
model that you wish to rescan without starting over.
Delete all data
Use this tool to delete all 3D data in the current model.
Restore data
Use this tool to restore all data erased after scanning.
15.1.4 View editing tools
Impression model view
Click this button to change between the impression model
view and normal view.
Data density view
This view mode represents the density of data captured
during scan.
ICE view
NOTE
For intraoral cases only.
This mode renders actual scan images for a clear view of
margins, dentition and tissue.
Click this button to toggle between ICE view and stone
view.
NOTE
You can zoom and rotate the model while creating or
editing the margin.
15.1.5 Alignment tools
The buccal and opposing teeth will be automatically
aligned. The successful alignment is indicated with the
green point on the top right corner of the alignment button.
In case the alignment is not successful see section
15.12.1 “Aligning buccal data” on page 58.