60
A couple items of Note:
The columns that are visible on the spreadsheet will change
based on the mode, the number of sensors chosen, and the number of balances
chosen.
Choosing three sensors will yield columns for P2, and P3.
Choosing Programmable RP Mode will yield columns for the position of Valves V and W.
Choosing multiple balances will yield columns for Q2, Q3, QT, C2, C3 and CT, which relate
to the Quantities collected on balances 2 and 3 as well at their Collection rates, and the
totals of both.
When finished with a run, click on File-Save as: and choose an appropriate file name.
When ready for another run, simply press the “Clear Data” button, or close and re-open the
file.
The
STOP
and
RUN
keys on the FilterTec Plus front panel may be used to interrupt the
filtration process. This will only cause minor changes in the data and charts. They show up
in the data set by displaying the word PAUSE in the ST (Status) column of the Data
worksheet.
Using
the
EXIT
key however and then pressing Exec and RUN again in the same data
collection run, will replace the header information in the text box at the top of the worksheet,
while continuing to add data to the bottom of the sheet. It is recommended that you either
save the data as mentioned above, or dispose of it by clicking on the “Clear Data” button
prior to pressing the Exec and RUN keys again to begin a new set of data.
The FilterTec Plus allows the Constant Rate or Pressure to be changed on the fly by
pressing the RATE/PRESSURE key on the front panel. This is a very useful tool in
determining the optimum parameters for a process. When this key is pressed, the FilterTec
Plus will stop sending data to the worksheet until approx 15 seconds after having pressed
the “Select” button on the front panel to finalize the choice. As the process is continuing
while this is done, the data will reflect the change.
Please contact Parker customer service at 805-604-3400 or Technical Support at 608-824-0500
if you have any questions, comments or suggestions regarding the use of this data collection
software.
Содержание SciLog FilterTec Plus
Страница 1: ...1 SciLog FilterTec Plus Installation Operation Maintenance Instructions ...
Страница 39: ...39 ...
Страница 62: ...62 Appendix A Application Examples ...
Страница 66: ...66 Appendix B Troubleshooting ...