background image

Phaser Pure Water System Operation and Maintenance Manual  -  1

Overview

Thank you for purchasing the Phaser Pure Water 

System! With proper care, this unit will provide you with 

years of trouble free service. This system was designed 

with professional window cleaners in mind. The Phaser 

will help you clean faster, safer, and better than ever 

before, leaving spot free results that you and your 

customers will love!

The following is provided to help you understand how 

your system purifies water. The Phaser is a multi-stage 

water purification unit using Carbon/Sediment, Reverse 

Osmosis (RO), and Deionization (DI) to remove impurities 

from water before delivery to surfaces for cleaning. 

General lifespan of the filters will vary depending on 

feed water TDS (Total Dissolved Solids). Based on an 

average TDS of 100 ppm (parts per million) in your water, 

approximately 10,000 gallons of water can be passed 

through the Carbon/Sediment and DI filters before 

replacement filters are needed. Lower TDS levels in 

the source water will allow for a longer lifespan, while a 

higher TDS source levels will lead to a shorter lifespan. It 

is recommended that the Carbon/Sediment and DI filters 

be replaced at the same time. The RO membrane is 

rated to process 100,000 gallons under ideal conditions. 

Failure to properly maintain the RO membranes will 

reduce the life of the filter

Congratulations on your purchase.

In The Box

1. Unpacking/Inspecting The System

• TS-2200 (Phaser) System
 

• RO Filter

 

• DI Filter

• TDS Meter

• Quick-Connect Shut Off

• Bypass Hose

 

• Carbon Filter

Your system is packaged to stay undamaged in transit. 

Please inspect all components to ensure no damage 

has occurred prior to continuing. Carefully remove the 

packaging material from around the system and discard. 

Inspect your Phaser for any shipping damage. If damage 

has occurred, notify the shipping company that made 

delivery to begin a damage claim.

Parts Check

PHASER

Pure Water System

Window Cleaning System

Pure Water

Operation and Maintenance

Manual

Effective August, 2020

Summary of Contents for PHASER









Reviews: