61
7.2 PC HyperTerminal Settings:
FilterTec Plus to PC:
For PC Connections via the Printer Port a Parker RS-232 Cable (P/N:
080-073) is needed. When not using the Parker printer, this allows process data to be “dumped”
into a PC for archiving. The list of settings below must match those in Setup: Printer of the
FilterTec Plus, and Print Delay should be set to “0”. Alternatively, the USB port may be used.
The driver for the USB connection is on the CD this manual is on, and may be obtained from
technical support.
The following terminal setting procedure is intended for PCs with a
Window 98/XP
software
installation: Press the
START
button in the lower left corner of your screen, select
“Programs”
then select and open
“Accessories”,
select
“Hyper Terminal”.
If using
Vista
, HyperTerminal Personal Edition can be downloaded from the internet at:
http://www.hilgraeve.com/hyperterminal.html
From the
“Connection Description”
screen, select an icon and enter a file name, i.e. FilterTec
Plus.
Press “Ok”
From the
“Connect To”
screen, select
“Direct to Com 1”
in the box labeled “Connect Using”
or the Com Port assigned to the FilterTec Plus and
Press “Ok”.
From the
“Com 1 Property”
screen, select the following parameters
Bits per Second:
9600
Data Bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
None
Press “Ok”
Press “Ok”
at the bottom of the “FilterTec Plus Setup” screen.
A window with a blinking cursor will be presented, and the data stream from the FilterTec Plus
will be displayed as it occurs.
Содержание SciLog FilterTec Plus
Страница 1: ...1 SciLog FilterTec Plus Installation Operation Maintenance Instructions ...
Страница 39: ...39 ...
Страница 62: ...62 Appendix A Application Examples ...
Страница 66: ...66 Appendix B Troubleshooting ...