Parker FL-20-C Series, Руководство по эксплуатации продукта

Страница: 263 / 310

263
Setting
value
Function Name Instruction
Signal
type
0 Reserved Reserved Reserved
1 Alarm reset AL-RST
A number of faults (Alarms) can
be cleared by activating AL-RST. Edge
trigger
2~7 Reserved Reserved Reserved
8 Gain switchover GAIN-SEL Gain switchover
Level
trigger
9 Reserved Reserved Reserved
10 Pulse clear CLR
Position deviation register returns
to 0 at the position mode. Edge
trigger
11
Command pulse
prohibited
INH-P
External pulse command is
invalid at the position mode.
Level
trigger
12 Emergency stop ESP Motor stops urgently.
Level
trigger
13
Reverse run
prohibited
R-INH Motor is forbidden reverse run.
Level
trigger
14
Forward run
prohibited
F-INH Motor is forbidden forward run.
Level
trigger
15~21 Reserved Reserved Reserved
22
External reference
origin
ORGP
ORGP is external reference
origin. Edge
trigger
23 Reserved Reserved Reserved
24 Reserved Reserved Reserved
25 Reserved Reserved Reserved
26
Terminal forward
jogging
JOGU Realized by controlling terminal.
Level
trigger
27
Terminal reverse
jogging
JOGD Realized by controlling terminal.
Level
trigger
28 Motor overheat HOT Realized by controlling terminal.
Level
trigger
29~33 Reserved Reserved Reserved
34
Touchprobe-1 Touchprobe-1 Touchprobe-1
Level
trigger
35 Touchprobe-2 Touchprobe-2 Touchprobe-2
Level
trigger
Programmable output terminals include DO1 ~ DO4 (Related parameters are Po421~ Po424),
ALM (Related parameter is Po425).
Servo drive must be restarted after terminal function is set.