Parker FL-20-C Series, Руководство по эксплуатации продукта

Страница: 74 / 310

FL20-C Series
74
V. Keypad Operation and Parameters
5.1 Keypad operation
5.1.1 Keypad description
The name of keypad and each part as figure below:
▲
ALM
SON
显示器
▲
▲
MODE
四个可操作按键
四个按键标识符
RUN
Four operating keys
Four key identifiers
LCD display
Fig 5.1.1 Keypad sketch map
Identifier Name Function
SON
Indicator
(green)
Indicating that Servo is on.(Light on when servo on)
ALM
Indicator
(red)
Indicating that malfunction occurs.(Light on when faulty occurs)
RUN
EtherCAT
state indicator
EtherCAT state machine indicator
PANAL LCD Display
The LCD display (5-digit display panel) shows the monitor codes,
parameter settings and operation values of the servo drive.
MODE Mode key
1 Switching between function groups.
2 Displaying malfunction codes in turn.
▲
（
UP
）
UP
1 Press the key to increase the displayed value.
2 Hold the key for 0.5s to increase setting the value slowly.
3 Hold the key for over 1s to increase setting value rapidly.
4 Used to forward start in jogging run.
▼
(DOWN)
DOWN
1 Press the key to decrease the display value.
2 Hold the key for 0.5s to decrease setting value slowly.
3 Hold the key for over 1s to decrease setting value rapidly.
4 Used to reverse start in jogging run.
▲
（
SET
）
shift/set
1 Hold the key for 0.5s to enter into parameter setting mode
2 Pressing the key can move the cursor to the left and then change
parameter settings (blinking digits) by using arrow keys.
3 Hold the key for 0.5s to confirm and set current value into the
current user parameter.
4 Hold the key for 2s to reset the malfunction.