manualshive.com logo in svg

Paradyne COMSPHERE 3610, Руководство оператора

Программный инсталляционный руководство для Paradyne COMSPHERE 3610 теперь доступен для загрузки совершенно бесплатно с manualshive.com. Этот manual поможет вам правильно установить необходимое software на ваше устройство, обеспечивая его оптимальную работу. Необходимая информация теперь всегда под рукой!

Поделиться
Скачать
background image

4

6-1

3610-A2-GB91-90

July 1999

Configuration Options

Overview

6-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Option Sets

6-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Using the DCP to Set Configuration Options

6-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Editing Configuration Values

6-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Saving Configuration Options

6-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Configuration Options Tables

6-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

DSU Configuration Options

6-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Diagnostic Configuration Options

6-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

DBM Configuration Options

6-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

General Configuration Options

6-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Backup Configuration Options

6-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

MUX Configuration Options

6-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Port Speed Configuration Options

6-6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LPDA-2 Configuration Options

6-6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Keys to Using Configuration Option Tables

6-6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Overview

After the DSU and options are installed and any

necessary hardware switches or jumpers have been set, the
software configuration options must be set. Configuration
options are set via the Model 3610 DSU’s diagnostic
control panel (DCP) or async terminal, or the Model 3611
DSU’s shared diagnostic control panel (SDCP), by
accessing the Configuration (Confg) branch of the menu.

This chapter focuses on the Configuration Option

(Opts) subbranch, describes how to edit configuration
options and save changes, and provides Configuration
Option Tables that describe each configuration option in
an option set and its selections.

Option Sets

There are eight configuration option areas (or option

sets) within the DSU:

•

The active area (Activ) contains the DSU
configuration options currently being used.

•

The remote area (Remt) allows a selected DSU’s
configuration options to be retrieved so they can be
displayed, edited, and/or saved back to the selected
DSU, another DSU, or the local DSU. The remote

configuration option sets that can be retrieved are
Activ, Usr1, Usr2, and Usr3.

•

The user 1 area (Usr1) is a customer-defined set of
stored configuration options. By having these
predetermined option sets stored, they can be
loaded rapidly as operating requirements change.

•

The user 2 area (Usr2) is functionally the same as
Usr1, providing further flexibility when creating
configurations for various applications.

•

The user 3 area (Usr3) is another customer-defined
option set; however, it comes factory-loaded with
the configuration option set for a DBM-V, DBM-S,
or DBM-D (carrier-mounted DBMs only).

CAUTION

Since this area can be
overwritten, care should be
taken to not save to this area if
you have a DBM-V, DBM-S, or
DBM-D as part of your
configuration.

6

Содержание COMSPHERE 3610























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для COMSPHERE 3610

SWEEX MO128 - QUICK_START_GUIDE Installation Manual preview
MO128 - QUICK_START_GUIDE
Бренд: SWEEX Страницы: 9
Summit Microwave link BT Series Quick Start Manual preview
Microwave link BT Series
Бренд: Summit Страницы: 8
Dynamix UM-S Series Quick Start Manual preview
UM-S Series
Бренд: Dynamix Страницы: 2
Billion 5100SM Specifications preview
5100SM
Бренд: Billion Страницы: 1
Billion BIPAC-5100S User Manual preview
BIPAC-5100S
Бренд: Billion Страницы: 72
Zte K4607-Zr Quick Start Manual preview
K4607-Zr
Бренд: Zte Страницы: 9
Racal-Vadic 9600VP User Manual preview
9600VP
Бренд: Racal-Vadic Страницы: 98
Four-Faith F8916-L-C User Manual preview
F8916-L-C
Бренд: Four-Faith Страницы: 39
US Robotics 002605-00 - Installation Manual preview
002605-00 -
Бренд: US Robotics Страницы: 152
Zte MF289F Manual preview
MF289F
Бренд: Zte Страницы: 7
NetComm NB9WMAXXn Setup preview
NB9WMAXXn
Бренд: NetComm Страницы: 4
Fargo Maestro 100 Setup Manual preview
Maestro 100
Бренд: Fargo Страницы: 11
Tandy 1400LT User Manual preview
1400LT
Бренд: Tandy Страницы: 86
Dataradio INTEGRA-H Technical Manual preview
INTEGRA-H
Бренд: Dataradio Страницы: 43
Dataradio GeminiG3 User Manual preview
GeminiG3
Бренд: Dataradio Страницы: 57
Campbell Sierra Wireless AirLink RV50 Product Manual preview
Sierra Wireless AirLink RV50
Бренд: Campbell Страницы: 58
GIGA Copper G4201C Quick Start Manual preview
G4201C
Бренд: GIGA Copper Страницы: 3
Campbell Raven XT-Telus Instruction Manual preview
Raven XT-Telus
Бренд: Campbell Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды