Paradyne COMSPHERE
3610, Руководство оператора

Страница: 133 / 310

Configuration Options
6-5 3610-A2-GB91-90 July 1999
Configuration Options Tables
There is a configuration option table for each
functional group or option set within the Configuration
(Confg) branch of the menu. The following sections
identify each table and the function that each performs.
DSU Configuration Options
The DSU configuration options ( Table 6-1 ) determine
the configuration of the DSU.
Diagnostic Configuration Options
The Diagnostic configuration options determine the
diagnostic connections and whether nondisruptive
diagnostics are enabled.
There are three submenus in the menu tree dedicated to
configuring the Diagnostic configuration options:
•
Diagnostic DSU Configuration Options ( Table 6-2 )
•
Diagnostic DBM Configuration Options ( Table 6-3 )
•
Diagnostic General Configuration Options
(
Table 6-4 )
DBM Configuration Options
The DBM configuration options ( Table 6-5 ) determine
the configuration of the DBM.
For additional DBM configuration option information,
order the COMSPHERE 3600 Series Data Service Units,
Models 3610 and 3611, Dial Backup Module and SNA
Diagnostic Interface Options, Applications Guide.
General Configuration Options
The General configuration options ( Table 6-6 )
determine the operation of the DTE interface for both the
DSU and DBM.
A related table ( Table 6-7 ) shows the relationship
between the RTS Control, CTS Control, CTS Lead, and
Circuit Assurance configuration options. When the DSU
is set with one group of the four interrelated configuration
options, then an event (such as RTS changes) results in the
subsequent CTS circuit behavior (such as CTS changes
with RTS).
Backup Configuration Options
The Backup configuration options ( Table 6-8 )
determine the operation of the DBM.
For additional Backup configuration option
information, order the COMSPHERE 3600 Series Data
Service Units, Models 3610 and 3611, Dial Backup
Module and SNA Diagnostic Interface Options,
Applications Guide.
MUX Configuration Options
There are two submenus in the menu tree that are
dedicated to configuring the TDM or MCMP option:
MUX and PrtSp. The MUX submenu is used to select the
mode of operation or the TDM or MCMP circuit card’s
function (TDM, MCMP, Bridge, or None), and to set
configuration options on a per-port basis. Using the Copy
feature, configuration options set for one port can be
copied over to either a single port or to all other ports. The
applicable tables are listed below:
•
TDM Setup (MUX Funct: TDM) Configuration
Options (
Table 6-9 )
•
MCMP Setup (MUX Funct: MCMP) Configuration
Options (
Table 6-10 )
•
Digital Bridge Setup (MUX Funct: CBrdg or
EBrdg) Configuration Options (
Table 6-11 )
•
TDM/MCMP Port Configuration Options
(
Table 6-12 )
•
Digital Bridge Port Configuration Options
(
Table 6-13 )
Always select the mode (MUX Funct) first and then set
the configuration options for the mode selected. Choosing
a mode affects which configuration options are available
for viewing or editing and the values that appear for each.
For additional MUX configuration option information,
order the COMSPHERE 3600 Series Data Service Units,
Models 3610 and 3611, Time Division Multiplexer,
Multichannel Multipoint, and Digital Bridge Options,
Applications Guide.