Paradyne COMSPHERE
3610, Руководство оператора

Страница: 121 / 310

DSU Operations
4-41 3610-A2-GB91-90 July 1999
Front Panel (DCP) Security
NOTE
This page can be removed to
prevent unauthorized persons
from learning about the security
access levels and their selection.
The Model 3610 diagnostic control panel (DCP) and
Model 3611 shared diagnostic control panel (SDCP) have
two levels of security access, as shown in Table 4-14.
Table 4-14
Security Access Levels
Security
Access Level
Functions Available
Unlock All
Lock Local branch only:
S
Status branch
S
Configuration branch:
Display only (no changes)
S
Control branch:
Display External Leads only
(no changes)
The 3600 Series DSUs are shipped from the factory
with the security level set at Unlock. When the DCP is
locked, only the Local branch displays on the control
DSU.
NOTE
To lock or unlock the DCP, the
async terminal must be disabled.
If the security has not been set on the DCP before, the
following displays:
F1
FP Access: ? ? ?
Lock Unlock Save
F2 F3
To select the security level:
"
Procedure
1. Press the key to ensure that you are at the
top-level menu.
2. Press the and keys simultaneously for
three seconds. The following menu appears:
F1
FP Access: Unlock
Lock
Unlock Save
F2 F3
3. Select the security level:
Lock – To restrict access
Unlock – To provide full access
Press the appropriate function key (F1 or F2).
4. Select Save (F3).
Terminating Async Terminal Control
To return control of the DSU to the DCP when async
terminal (Term) has been enabled:
1. Press the and keys simultaneously for
three seconds. The following menu appears:
F1
Pswrd: _ _ _ _ _ _ _ _
↑ ↓
Enter
F2
F3
2. Enter the password.
Up to 8 characters can be entered. Valid password
characters include 0 through 9, a through z (upper-
or lowercase), # , /, –, and a period ( . ).
Enter the password characters by using the F1 (
↑
)
and F2 (
↓
) keys to increment or decrement
numbers, and the and keys to move the
cursor to the left or right. (For this example,
12345678 is the password.)