Pacific Power Source AFX Series, Руководство по эксплуатации

Страница: 333 / 485

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 333 of 485
Command Syntax [SOURce:]INTHarmonic:VOLTage[:AC#]
Description Sets the inter harmonic voltage amplitude for the selected phase (1 =
A, 2 = B, 3 = C) or for all three phases if the phase selection is omitted
in Vac RMS
Parameters Voltage
Parameter Format <nr2>
Example INTH:VOLT:AC1 12.00
Query Format
[SOURce:]INTHarmonic:VOLTage[:AC#]?
Description Query format returns the interharmonic amplitude setting.
Returned Data Format <nr2>
Query Example INTH:VOLT?
12.0000, 0.0000, 0.0000
Command Syntax [SOURce:]INTHarmonic:VOLTage:AC#:DEFault
Description Sets the default amplitude of the interharmonic voltage component
for all phases. The factory default setting is 0.000 Vrms.
Parameters Frequency
Parameter Format <nr2>
Example INTH:VOLT:AC:DEF 5
Query Format [SOURce:]INTHarmonic:VOLTage:AC#:DEFault?
Description Query format returns the interharmonic default amplitude setting.
Returned Data Format <nr2>
Query Example INTH:VOLT:AC:DEF?
5.0000, 5.0000, 5.0000
Query Format [SOURce:]INTHarmonic:VOLTage:AC#:MAXimum?
Description Returns the maximum value for the interharmonic amplitude setting
which is 300.0000 Vac RMS.
Returned Data Format <nr2>
Query Example INTH:VOLT:AC:MAX?
300.0000
Query Format [SOURce:]INTHarmonic:VOLTage:AC#:MINimum?
Description Returns the minimum value for the interharmonic amplitude setting
which is 0.0000 Vac RMS.
Returned Data Format <nr2>
Query Example INTH:VOLT:AC:MIN?
0.0000