Oxford Instruments OpAL Скачать руководство пользователя страница 4

Страница: 4 / 342

OpAL

Oxford Instruments Plasma Technology

System Manual

Preface

This manual is the OPERATION and MAINTENANCE MANUAL. It provides all the

information necessary for the operation and routine maintenance of the system. Certain

components within the system are supplied by other manufacturers. These components

have their separate manuals which are included, and should be referred to for detailed

operation, maintenance and repair information.

WARNING

SERVICE BY

QUALIFIED STAFF

ONLY

Refer to manual

Where this label is displayed (black text on a yellow

background), read the relevant manual before proceeding

to operate or maintain the labelled equipment.

Customer Support Facilities

Oxford Instruments Plasma Technology has global Customer Support Facilities to provide

a co-ordinated response to customer’s queries. All queries are recorded on our Support

Database and dealt with as quickly as possible. If we are not able to answer the query

immediately, we will contact you as soon as possible.

Before contacting a Customer Support Facility, please ensure that you have referred to the

appropriate section of your system manual, OEM manuals and electrical drawings.

Please direct all queries through your nearest support facility (see below) and have the

following details available.

System Type, e.g.

OpAL

etc.

Works Order No. – This can be found on the front cover of your system manual.

Contact Information – Your name, Company and how we can contact you.

Details of your query – nature of the problem, part numbers of spares required, etc.

You can contact us via any of the following:

China

Beijing

Tel: +86 106518 8160
Email:

[email protected]

Shanghai

Tel: +8621 6360 8530
Email:

[email protected]

Germany

Tel: +49 6122 937 161
Email:

[email protected]

Japan

Tel: +81 3 5245 3591
Email:

[email protected]

Singapore

Tel: +65 6337 6848

Email:

[email protected]

Taiwan

Tel: +886 3 5788696
Email:

[email protected]

Customer Support Hotline: +44(0) 1934 837070
(0800 – 2000 UK local time)
Fax: +44(0) 1934 837071
Email:

[email protected]

USA

Oxford Instruments Inc.
300 Baker Avenue, Suite 150
Concord, MA 01742
Phone: +1 978-369-9933
Toll Free: +1 800-447-4717
Fax: +1 978-369-8287
Email:

[email protected]

Preface

Printed: 14 July 2010 08:52

Page (iv)

Issue 1: July 2010

Содержание OpAL























































































































































































































































































































































Результаты поиска

Содержание OpAL

Отзывы:

Бренды по названию

Популярные бренды

Oxford Instruments OpAL, Системное руководство

Результаты поиска

Содержание OpAL

Отзывы:

Бренды по названию

Популярные бренды