Omron SX-F, Инструкция по эксплуатации

Страница: 212 / 316

204
I/Os and Virtual Connections [500]
Section 11-5
AnOut1 Bipol [5333]
Automatically displayed if User Bipol mA or User Bipol V is selected in menu
AnOut1 Setup. The menu will automatically show mA or V range according to
the selected function. The range is set by changing the positive maximum
value; the negative value is automatically adapted accordingly. Only visible if
[512] = User Bipol mA/V.
Communication information
AnOut1 Function Min [5334]
With AnOut1 Function Min the physical minimum value is scaled to selected
presentation. The default scaling is dependent of the selected function of
AnOut1 [531].
Table 28 shows corresponding values for the min and max selections depend-
ing on the function of the analogue output [531].
Fieldbus format Long, 1=0.01
Modbus format EInt
Default: -10.00–10.00 V
Range: -10.00–10.00 V, -20.0–20.0 mA
Modbus Instance no/
DeviceNet no:
43255
Profibus slot/index 169/159
EtherCAT index (hex) 4cb7
Fieldbus format Long, 1=0.01
Modbus format EInt
Default: Min
Min 0 Min value
Max 1 Max value
User-defined 2 Define user value in menu [5335]
Table 28
AnOut Function Min Value Max Value
Process Value Process Min [324] Process Max [325]
Speed Min Speed [341] Max Speed [343]
Torque 0% Max Torque [351]
Process Ref Process Min [324] Process Max [325]
Shaft Power 0% Motor Power [223]
Frequency 0 Hz Motor Frequency [222]
Current 0 A Motor Current [224]
El Power 0 W Motor Power [223]
Output Voltage 0 V Motor Voltage [221]
DC voltage 0 V 1000 V
AnIn1 AnIn1 Function Min AnIn1 Function Max
AnIn2 AnIn2 Function Min AnIn2 Function Max
AnIn3 AnIn3 Function Min AnIn3 Function Max
AnIn4 AnIn4 Function Min AnIn4 Function Max
5333 AnOut1Bipol
Stp
-10.00-10.00V
5334 AnOut1FCMin
Stp
Min
A