![background image](http://html1.mh-extra.com/html/omron/sx-f/sx-f_instruction-manual_743231155.webp)
147
Process and Application Parameters [300]
Section 11-3
Fig. 77
Jog command
11-3-6 Torques [350]
Menu with all parameters for torque settings.
Maximum Torque [351]
Sets the maximum motor torque (according to menu group Motor Data [220]).
This Maximum Torque operates as an upper torque limit. A Speed Reference
is always necessary to run the motor.
Communication information
Note
100% Torque means: I
NOM
= I
MOT
. The maximum depends on the motor
current and VSD max current settings, but the absolute maximum adjustment
is 400%. The maximum possible setting for parameter [351] is limited by
Inom/Imot * 120% but not higher than 400%.
Note
The power loss in the motor will increase by the square of the torque when
operating above 100%. 400% torque will result in 1600% power loss, which
will increase the motor temperature very quickly.
IxR Compensation [352]
This function compensates for the drop in voltage over different resistances
such as (very) long motor cables, chokes and motor stator by increasing the
output voltage at a constant frequency. IxR Compensation is most important
at low frequencies and is used to obtain a higher starting torque. The maxi-
mum voltage increase is 25% of the nominal output voltage. See Fig. 78.
t
t
f
(NG_06-F18)
Jog
Freq
Jog
com-
mand
Default:
120% calculated from the motor data
Range:
0–400%
Modbus Instance no/
DeviceNet no:
43141
Profibus slot/index
169/45
EtherCAT index (hex)
4c45
Fieldbus format
Long, 1=1%
Modbus format
EInt
T
MOT
Nm
P
MOT
w
x60
n
MOT
rpm
x2
-----------------------------------------
100
=
=
%
120%
A
Содержание SX-F
