Edwards Signaling Adaptatone 5530M-485 Series, Руководство по установке

Страница: 1 / 13

Installation Instructions for Catalog Series 5530M-485
Adaptatone
®
Millennium Signal
Description and Operation Description and Operation Description and Operation Description and Operation Description and Operation
Edwards Adaptatone is a heavy-duty, tone-selectable, stand
alone, indoor/outdoor audible signaling device intended
for industrial applications where high audible output and
microcomputer reliability are required. The Adaptatone
Millennium series are UL and cUL Listed as Audible Signal
Appliances for use in the following hazardous locations.
Catalog Current (A)
Number Voltage Standby Tone On
Standard Volume
5530M-485Y6 125V DC 0.10 0.21
250V DC 0.02 0.10
120V AC 50/60 Hz 0.10 0.32
240V AC 50/60 Hz 0.10 0.20
5530MHV-485Y6 125V DC 0.10 0.39
250V DC 0.02 0.19
120V AC 50/60 Hz 0.10 0.56
240V AC 50/60 Hz 0.10 0.34
5530MV-485Y6 125V DC 0.10 0.20
250V DC 0.02 0.10
120V AC 50/60 Hz 0.10 0.31
240V AC 50/60 Hz 0.10 0.20
Figure 1. Dimensions
P/N 3100345 ISSUE 2 © 2002
Catalog Hazardous Temp.
Number Locations Code
5530M-485Y6 Class I, Div. 2, Groups A, B, C, D T4 (135C)
5530MHV-485Y6 Class II, Div. 2, Groups F, G T5 (100C)
5530MV-485Y6 Class III, Div. 1 and 2
The Adaptatone operates from local power and sounds a
high decibel signal determined by the setting of minia-
ture programming switches inside the unit. The
Adaptatone may be programmed for any of the 27 tones
listed in Figure 7.
Speaker direction and the output level are easily adjust-
able.
Mechanical Specifications Mechanical Specifications Mechanical Specifications Mechanical Specifications Mechanical Specifications
Weight ................................................... 9 Pounds (4.1 kg)
Hazardous Locations, UL Standard UL1604
Ambient Temp. ................... +41F to +104F (+5C to +40C)
Non-Hazardous Locations
Variable Ambient Temp. ..... -40F to +151F (-40C to +66C)
1. Mount Adaptatone as shown in Figure 2.
a.
Flat Surface Mounting
. Secure unit to
mounting surface using the (4) mounting holes in
the mounting plate on the rear of the box. Use
the #10 x 3" (76 mm) wood screws (furnished loose)
or other hardware (not supplied) suitable for the
mounting surface.
b.
Rigid Pipe Mounting
. Loosen the (4) cover screws
from the signal box and lift off signal box cover.
CAUTION CAUTION CAUTION CAUTION CAUTION
During installation, care must be taken so that components
on the printed circuit board are not damaged.
Electrical Specifications Electrical Specifications Electrical Specifications Electrical Specifications Electrical Specifications
Installation Installation
Installation Installation Installation
The Adaptatone may be mounted to any flat surface or
may be used as a freestanding unit mounted to a rigid
pipe. The Adaptatone must be installed in accordance
with the latest edition of the National Electrical Code or
other regulations applicable to the country and locality
of installation and by a trained and qualified electrician.
Dimensions
5530M 5530MHV
A 8 7/8" 11 1/2"
(225 mm) (292 mm)
B 8 1/4" 9 3/4"
(210 mm) (248 mm)
C 13" 14 1/4"
(330 mm) (362 mm)