Omron SX-F, Инструкция по эксплуатации

Страница: 82 / 316

74
Programming during operation
Section 9-4
9-3-1 The main menu
This section gives you a short description of the functions in the Main Menu.
100 Preferred View
Displayed at power-up. It displays the actual process value as default. Pro-
grammable for many other read-outs.
200 Main Setup
Main settings to get the VSD operable. The motor data settings are the most
important. Also option utility and settings.
300 Process and Application Parameters
Settings more relevant to the application such as Reference Speed, torque
limitations, PID control settings, etc.
400 Shaft Power Monitor and Process Protection
The monitor function enables the VSD to be used as a load monitor to protect
machines and processes against mechanical overload and underload.
500 Inputs/Outputs and Virtual Connections
All settings for inputs and outputs are entered here.
600 Logical Functions and Timers
All settings for conditional signal are entered here.
700 View Operation and Status
Viewing all the operational data like frequency, load, power, current, etc.
800 View Trip Log
Viewing the last 10 trips in the trip memory.
900 Service Information and VSD Data
Electronic type label for viewing the software version and VSD type.
9-4 Programming during operation
Most of the parameters can be changed during operation without stopping the
VSD. Parameters that can not be changed are marked with a lock symbol in
the display.
Note If you try to change a function during operation that only can be changed
when the motor is stopped, the message “Stop First” is displayed.