Omron SX-F, Инструкция по эксплуатации

Страница: 256 / 316

248
View Operation/Status [700]
Section 11-7
1: DigOut1
2: DigOut2
The status of the associated output is shown.
1: High
0: Low
The example in Fig. 112 indicates that DigOut1 is active and Digital Out 2 is
not active. Relay 1 is active, relay 2 and 3 are not active.
Fig. 112 Digital output status example
Communication information
Analogue Input Status [725]
Indicates the status of the analogue inputs 1 and 2.
Fig. 113 Analogue input status
Communication information
The first row indicates the analogue inputs.
1: AnIn 1
2: AnIn 2
Reading downwards from the first row to the second row the status of the
belonging input is shown in %:
-100% AnIn1 has a negative 100% input value
65% AnIn2 has a 65% input value
So the example in Fig. 113 indicates that both the Analogue inputs are active.
Note The shown percentages are absolute values based on the full range/scale of
the in- our output; so related to either 0–10 V or 0–20 mA.
Modbus Instance no/
DeviceNet no:
31018
Profibus slot/index 121/162
EtherCAT index (hex) 23fa
Fieldbus format UInt, bit 0=DigOut1,
bit 1=DigOut2
bit 8=Relay1
bit 9=Relay2
bit 10=Relay3
Modbus format
Modbus Instance no/
DeviceNet no:
31019, 31020
Profibus slot/index 121/163, 121/164
EtherCAT index (hex) 23fb, 23fc
Fieldbus format Long, 1=1%
Modbus format EInt
724 DigOutStatus
Stp RE 100 DO 10
725 AnIn 1 2
Stp -100% 65%