Olivetti d-Color MF 4003 Скачать руководство пользователя страница 340 | Manualshive

Страница: 340 / 688

Olivetti d-Color MF 4003 Скачать руководство пользователя страница 340

I SERVICE MODE > 17. Network Settings

I-124

d-Color MF4003/MF3303

Existence Notice Interval

• To set the time interval used to send existence notice packets for existence notice from the MFP to the XMPP server.

Setting range

Default setting

1 to 3600 sec.

55 sec.

Learning Function

• To set whether to enable “Learning function” used to change the packet transmission interval in accordance with the XMPP session state

when sending existence notice.

Setting item

Description

Setting

Default setting

Learning Function

To set whether to enable the learning function.

• When [Enable] is set, the adjust value and lower limit must be

configured.

Enable

Disable

○

Adjust Value

To lengthen the next packet transmission interval by the amount of the
"adjust value" when a existence notice is sent successfully.
To shorten the next packet transmission interval by the amount of the "adjust
value" when a existence notice is sent unsuccessfully.

1 to 3600 sec.

30 sec.

Lower Limit

To make sure not to set the packet transmission interval shorter than the
"lower limit".

1 to 3600 sec.

30 sec.

17.3 Port Settings

• To set the threshold value for determining the load state of the Raw port.

Setting range

Default setting

1 to 60 minutes

3 minutes

17.4 MTU Param. set.

• Set the maximum value (MTU) of data that can be transmitted at once.
• Set operations of Path MTU Discovery.

NOTICE

• Path MTU Discovery detects the minimum MTU on the communication path and uses it to automatically set the MTU size.

Path MTU Discovery Settings

• Set whether to enable Path MTU Discovery.

Setting

Description

Default setting

0

To enable Path MTU Discovery.

○

1

To disable Path MTU Discovery.

Minimum MTU Size Setting

• This setting is available when Path MTU Discovery is enabled.

Setting range

Description

Default setting

68 byte to 1500 byte

The setting value is used as the minimum MTU size of the packet to be sent.

552 byte

Fixed MTU Size Setting

• This setting is available when Path MTU Discovery is disabled.

Setting range

Description

Default setting

1280 byte to 1500 byte

The setting value is used as the fixed MTU size of the packet to be sent.

1500 byte

Service Manual

Y119930-3

«
...
338
339
340
341
342
...
»

Содержание d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов