Olivetti d-Color MF 4003, Руководство по обслуживанию

Страница: 237 / 688

I SERVICE MODE > 8. CS Remote
I-21
d-Color MF4003/MF3303
8.1.6 Checking the transmission log
• The transmission log list will be output to be checked.
<Procedure>
1. Touch [CS Remove Care] -> [Maintenance/Default Settings] -> [Detail Setting].
2. Touch [Communication Log Print].
3. Load tray 1 or bypass tray with A4S paper.
4. Press the Start key to output transmission log.
8.1.7 Maintenance/Default Settings
(1) System Selection
• To select the system type for remote diagnosis.
• Use to newly build or change the system.
Setting value Contents Default setting
E-Mail1 Use E-mail Bilateral communication.
○
E-Mail2 Use E-mail Unilateral communication.
http1 Use http Bilateral communication.
http2 Use http Unilateral communication.
Modem Use modem communication
Fax Use fax communication
Fax is available only when the optional fax kit is being installed.
(2) ID Code
To register the service ID.
<Procedure>
1. Touch [ID code] and enter the service ID.
• Enter a 7-digit code from the 10-key pad. (0000001 to 9999999)
2. Touch [ID code] to register the ID.
3. The [Detail Setting] will appear when the ID has been registered.
(3) Detail Setting
(a) Basic Settings
• Execute the primary setting.
• Use to register the machine to the CS Remote Care center.
Center Setting
• It will be displayed when “E-Mail1” or “E-Mail2” is selected in System Setting.
Setting item Contents Setting value Default setting
Center ID Set the center ID.
When all setup procedures are completed, the center ID is displayed. 5-digit
alphanumeric
characters 00000
Device ID Display the device ID.
It can only be displayed but not be changed. 13-digit
alphanumeric
characters -
E-mail Address Set the center E-mail address.
When all setup procedures are completed, the center E-mail address is
displayed. Alphanumeric
characters and
symbols (up to
129 characters) -
Encryption Set whether or not to encrypt E-mail.
When all setup procedures are completed, the details of setting is displayed. Yes
No
○
Schedule
• It will be displayed when or “E-Mail2” is selected in System Setting.
• To set the schedule of notification to the center.
• Up to three different notification schedules can be registered.
<Procedure>
1. Select the key of the registration number, and then touch [Enable].
2. Select the notification cycle from [Day], [Week], or [Month].
• When selecting [Day] for the notification cycle, set the Day Frequency.
• When selecting [Week] for the notification cycle, set the Week Frequency and day of the week.
• When selecting [Month], set the Month Frequency and the date of the month.
3. Touch [SET] to register the schedule.
Center Notifi. Item
• It will be displayed when or “E-Mail2” is selected in System Setting.
• To set whether or not to report to the Center.
• To report to the center, select the notification item to the center.
Setting item Contents
No Notification Select it to disable the report to the center.
[1] Sales count data
Y119930-3 Service Manual