Olivetti d-Color MF 4003, Руководство по обслуживанию

Страница: 184 / 688

H UTILITY MODE > 6. Administrator
H-16
d-Color MF4003/MF3303
6.3.32 ADF original skew adj.setting
Key name Function/Precondition
ADF original skew adj.setting It will be displayed when the ADF is installed.
6.3.33 Def. operation mode set.
Key name Function/Precondition
Def. operation mode set. -
6.3.34 Paper Size/Type Settings Screen Display
Key name Function/Precondition
Paper Size/Type Settings
Screen Display -
6.4 Security
Key name Function/Precondition
Certificate Verification Settings -
Limiting Access to Destinations -
Restrict User Access Registering and
Changing Addresses • It will not be displayed when [Service Mode] -> [Billing Setting] ->
[Management Function Choice] shows that the “Vendor 2” is mounted.
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to “ON,”
selecting [Allow] for [Registering and Changing Addresses] cancels enhanced
security mode.
• The [Biometric/IC Card Information Registration] key displays if [Authentication
Device2] is mounted via [Service Mode] -> [Billing Setting], and [Administrator]
-> [User Auth/Account Track] -> [Authentication Type] -> [User Authentication]
is set to “ON (MFP).”
• The [Synchronize User Authentication / Account Track By User] key displays
when [Administrator] -> [User Auth/Account Track] -> [Authentication Type] ->
[Synchronize User Authentication / Account Track] is set to “Synchronize by
User.”
Biometric/IC Card
Information Registration
Changing the “From”
Address
Synchronize User
Authentication / Account
Track By User
Restrict Program
Function Setting
Multiple Addresses
Restriction Setting
Add Dest. Button
Select All Groups
Changing Job Priority
Delete Other User Jobs
Changing Zoom Ratio
Change Registered
Overlay
Copy security It will be displayed when the security kit is mounted.
Auto Logout -
Administrator Password Setting When [Administrator] -> [Security] -> [Security Details] -> [Password Rules] is enabled, the following
passwords cannot be accepted: password of single repeated characters, password same as the one before
being changed, and password where the number of characters is less than the minimum number specified in
[Set Minimum Password Length].
Copy Program Lock Settings -
Delete Saved Copy Program -
Administrator Password Change
Permission Setting -
User Box Administrator Setting It will be displayed when carrying out the user authentication as well account track.
Administrator Security Levels It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] shows that
the “Vendor 2” is mounted.
TX Operation Log Setting To print the saved sending operation logs or save them in USB memory, select [Administrator] -> [System
Settings] -> [List/Counter] -> [TX Operation Log Output].
Security Details Password Rules • This setting cannot be enabled when [Service Mode] -> [Enhanced Security] ->
[CE Authentication] is set to “OFF.” “OFF” cannot be set for [CE Authentication]
when [Password Rules] is enabled.
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to “ON,”
disabling this setting cancels enhanced security mode.
• When the password rule is enabled, the password cannot be changed or
registered unless it follows the above conditions.
ProhibitFunctions • If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to “ON,”
selecting “Mode1” in this setting cancels enhanced security mode. Only the
number of times for trials up to the access lock can be changed.
• For details of the functions, refer to " H.12.3.1 ProhibitFunctions ."
Service Manual Y119930-3