Nortel BSG12aw 1.0, Руководство по настройке

Страница: 95 / 200

WAN advanced configuration 95
Configuration Guide
Multilink Configuration
On the Multilink Configuration page, you can configure the multilink for T1/E1.
To access this page, select Configuration, WAN, T1/E1, Multilink tab.
Variable definitions
This table describes the variables that appear on the Multilink Configuration page.
IP Address The IP address of the PPP/Multilink
interface, if IP Address Assignment is
Manual.
Subnet Mask The Subnet Mask for the IP address, if IP
Address Assignment is Manual.
Peer IP Address The Peer IP address, if IP Address
Assignment is Manual.
Primary DNS Server The Primary DNS server IP address, if IP
Address Assignment is Manual.
Secondary DNS Server The Secondary DNS server IP address, if
IP Address Assignment is Manual.
Peer DNS The Peer DNS IP address, if IP Address
Assignment is Manual.
Variable Value
Authentication Required The Authentication Required setting for
the multilink interface.
Options:
Yes—authentication is required. Enables
the Server/Client, User Name, and
Password fields.
No— authentication is not required for
multilink interface.
The default value is NO.
Server/Client Select Server or Client for authentication.
Options:
Select Server to authenticate your peer at
the time of negotiation.
Select Client to be authenticated by the
peer router.
User Name The User Name required for the Server or
Client that requires authentication.
Password The password for the specified user.
Variable Value