Nortel BSG12aw 1.0, Руководство по настройке

Страница: 44 / 200

44 Wireless network configuration
NN47928-500 NN47928-500
2 From the list of security settings, select the first default SSID .
The first SSID is enabled.
3 From the Authentication Type list, choose an authentication type.
4 From the Pre-Authentication Status list, select Enabled or Disabled .
This field is available only if Authentication Type is set to WPA , WPA2 ,
WPA-WPA2-Mixed, or Open1x .
5 From the Pre Shared Key Type list, select HEX or ASCII .
This field is available only if Authentication Type is set to WPA-PSK ,
WPA2-PSK , or WPA-WPA2-PSK-Mixed .
6 In the Pre Shared Key field, type the pre-shared key value.
This field is available only if Authentication Type is set to WPA-PSK ,
WPA2-PSK , or WPA-WPA2-PSK-Mixed .
7 From the Cipher Suite list, select the cipher used for data encryption.
This field is available only if Authentication Type is set to WPA, WPA2,
WPA-WPA2-Mixed, WPA-PSK , WPA2-PSK , or WPA-WPA2-PSK-Mixed .
8 In the PMK SA Lifetime field, type the maximum lifetime of a PMK in the PMK
cache.
This field is available only if Authentication Type is set to WPA, WPA2,
WPA-WPA2-Mixed, WPA-PSK , WPA2-PSK , WPA-WPA2-PSK-Mixed , or
Open1x .
9 Click Apply .
10 Select the Basic Settings tab.
The Basic WLAN Page pane appears.
11 From the Access Point list, select Enabled .
12 From the Country Code list, select the appropriate country.
13 From the Radio Mode list, select Mixed .
14 Click Apply .
End