Nortel BSG12aw 1.0, Руководство по настройке

Страница: 94 / 200

94 WAN advanced configuration
NN47928-500 NN47928-500
IP Configuration
To access this page, select Configuration, WAN, T1/E1, IP Configuration tab.
Variable definitions
This table describes the variables that appear on the IP Configuration page.
Server/Client Select whether the Server or Client is
required for authentication. This field is
available only if authentication is required.
Options:
Server - to authenticate the peer at the
time of negotiation.
Client - to be authenticated by the peer
router.
User Name The User Name required for the Server or
Client that requires authentication.
This field is available only if authentication
is required.
Password The password for the specified user.
This field is available only if authentication
is required.
Keep Alive The Keep Alive Time Out value in
seconds. If no Echo response packet is
received within the time-out value, the
connection is lost.
The default value is 10.
Link Type The PPP link type.
Options:
Public—adds the default route for the PPP
interface.
Private—no default route is added for the
PPP interface.
The default value is Private.
MTU The Maximum Transmission Unit.
The default value is 1500.
Variable Value
PPP/MP Interface The PPP/Multilink interface for which the
IP address is configured.
IP Address Assignment The IP address assignment mode.
Options:
Dynamic—obtains the IP address
dynamically from the peer.
Manual—manual assignment of the IP
address.
Variable Value