Nortel BSG12aw 1.0, Руководство по настройке

Страница: 87 / 200

WAN advanced configuration 87
Configuration Guide
DSL
DSL appears under WAN configuration if you are connected to a BSG12aw.
On the Digital Subscribe Line (DSL) pages you can configure and control the DSL modem that
connects to the BSG. You can also configure the ATM parameters of the modem and access the
DSL modem statistics.
You must have access read/write permission to configure DSL.
DSL navigation
• DSL Basic Configuration (page 87)
• PPP Configuration (page 88)
• Rate limit configuration parameters (DSL) (page 89)
DSL Basic Configuration
On the DSL Basic Configuration page you can configure DSL parameters.
To access this page, select Configuration, WAN, DSL, Basic Configuration page.
Variable definitions
This table describes the variables that appear on the DSL Basic Configuration page.
Variable Value
DSL Name The DSL Name.
Options:
DSL-1
The default value is DSL-1.
DSL Connection Type The DSL connection type.
Options:
Auto—indicates Auto Connection Mode.
T1413— indicates T1413 connection mode.
GDMT—indicates GDMT connection mode.
G-Lite—indicates G-Lite connection mode.
ADSL2—indicates ADSL2 connection mode.
ADSL2+— indicates ADSL2+ connection mode.
The default value is Auto.
VPI / VCI The Virtual Path Identifier/Virtual Channel Identifier (VPI/VCI) used by the
DSL modem to make a connection.
The range is 0 to 255.
The default value for VPI is 8 and VCI is 35.