Nortel BSG12aw 1.0, Руководство по настройке

Страница: 53 / 200

SIP configuration 53
Configuration Guide
End
Variable definitions
The following table describes the variables and values for configuring FXO information.
Variable Value
FXO Channel Select the required FXO channel.
Channel Enable Select this check box to enable the administrative status of the
FXO channel.
The channel is available for use only when it is enabled.
Channel Number Type the FXO channel number. This is the number which
identifies the FXO line for an incoming call.
Password Type the password to access the FXO Channel.
Forward Number Type the forward number. This number is used when an
incoming call on the FXO channel requires forwarding.
Emergency Number Type the emergency number of the contact.
Ring Count Type the ring count. This is the maximum number of rings
within which FXO must get an answer from the remote
number.
The minimum value is 1 and maximum value is 6.
The default value is 2. This default appears after you configure
the channel number.
On Hook Detection Time Type the on-hook detection time.
The value ranges from 100 to10000 milliseconds.
The default value is 2000 milliseconds. This default appears
after you configure the channel number.