Nortel BSG12aw 1.0, Руководство по настройке

Страница: 108 / 200

108 LAN advanced configuration
NN47928-500 NN47928-500
Variable definitions
The following table describes the variables and variables for configuring wireless multimedia.
Variable Value
WMM Status Specifies the Wireless Multimedia (WMM) status.
Select Disabled to disable Quality of Service (QoS).
Select Supported or Required to enable QoS.
The default is Disabled.
Acknowledge Policy
AC0 (Best Effort) Select the status of AC0 as either Acknowledge or No Acknowledge.
The default value is Acknowledge.
AC1 (Background) Select the status of AC1 as either Acknowledge or No Acknowledge.
The default value is Acknowledge.
AC2 (Video) Select the status of AC2 as either Acknowledge or No Acknowledge.
The default value is Acknowledge.
AC3 (Video) Select the status of AC3 as either Acknowledge or No Acknowledge.
The default value is Acknowledge.
Basic Service Set Parameters
Log Contention Width
Minimum The minimum contention width of the AP in the radio.
The range is 1 to 15.
The default values for AC0 through AC3 are 4, 4, 3, and 2.
Log Contention Width
Maximum The maximum contention width of the AP in the radio.
The range is 1 to 15.
The default values for AC0 through AC3 are 10, 10, 4, and 3.
AIFSN The arbitrary inter frame sequence (AIFS).
The range is 1 to 15.
The default values for AC0 through AC3 are 3, 7, 2, and 2.
TXOP Limit The transmission opportunity of the AP in the radio.
The range is 0 to 65535.
The default values for AC0 through AC3 are 0, 0, 94, and 47.
Admission Control The status of admission of WMM parameters.
Options:
Enabled
Disabled.
The default value for AC0 through AC3 is Disabled.
Access Point Parameters
Log Contention Width
Minimum The minimum contention width of the AP in the radio.
The range is 1 to 15.
The default values for AC0 through AC3 are 4, 4, 3, and 2.
Log Contention Width
Maximum The maximum contention width of the AP in the radio.
The range is 1 to 15.
The default values for AC0 through AC3 are 6, 10, 4, and 3.