Nortel BSG12aw 1.0, Руководство по настройке

Страница: 188 / 200

188 SIP advanced configuration
NN47928-500 NN47928-500
Variable definitions
The following table describes the variables and values for adding routing rules.
Advanced dial plan configuration parameters
The following section describes the parameters for the configuration of an advanced dial plan
located at
Configuration
,
SIP, Routing Rules, Advanced tab
.
Variable Value
Mode of Dialplan Select the dial plan mode. Select one of the following options:
• Normal Mode Outgoing – creates a dial plan that is applicable in
Normal Mode.
• Backup Mode – creates a dial plan that is applicable in Backup Mode.
Condition Select the condition. Select one of the following options:
• All - All conditions. Only specify All when the routing table is empty.
• Non-numeric – condition is non-numeric string.
• Number is = – condition is number string with trailing wild characters
such as ? and *.
• Number Prefix = – condition is number string.
• Number In-range = – condition is number string with the start and end
numbers given in the range.
• Otherwise – must be specified as the condition in the last rule.
Value (for Condition) Type the value for the specified condition.
This option is disabled for some conditions.
Specify Number
Transformation Select this check box to enable number transformations.
Type Specifies the number transformations applicable to the condition. Select
one of the following type:
• Insert digits - the transformation is an insertion of digits.
• Drop digits - the transformation is a deletion of digits.
• Replace - the transformation is a replacement of digits.
Value (for Number
Transformation) Type the value to insert, drop, or replace.
Position Type the position. This is the position where the insertion, deletion, or
replacement starts.
If you want to add another number transformation, click the Add button to
add the new number transformation to the viewing window.
Specify Routes Select this check box to enable routes.
Route To Select the route.
The route values are Carrier Server and FXO1.
Priority Type the route priority.
If you want to add another route, click the Add button to add the new route
to the viewing window.