Nortel BSG12aw 1.0, Руководство по настройке

Страница: 150 / 200

150 DHCP advanced configuration
NN47928-500 NN47928-500
Variable definitions
The following table describes the variables and values for configuring DHCP host IP settings.
DHCP client access configuration parameters
The following section describes the parameters for configuration of DHCP client access located at
Configuration, DHCP, DHCP Server, Client Access tab .
Variable definitions
The following table describes the variables and values for adding a client access information for
DHCP.
Variable Value
Host MAC Address Type the MAC address of the host.
Pool Name Select the pool name.
Host IP Type the IP address of the host.
Identifier Type the IP address of the identifier. The identifier is a string of maximum
length 63.
Variable Value
Device Name Type the DHCP device name.
The maximum string length is 63 characters.
The space character cannot appear in the device name.
Device Status Specifies the device status. The device status restricts DHCP service to a
set of clients. Select one of the following options:
• Enable – only the clients in the Allow list are serviced. All other DHCP
requests are dropped by the server.
• Disable – all the DHCP requests on the client are dropped.
• Compatible – the request from the client is serviced only if there are no
clients in the Allow list.
The default value is Compatible.