Nortel BSG12aw 1.0, Руководство по настройке

Страница: 146 / 200

146 DHCP advanced configuration
NN47928-500 NN47928-500
DHCP server configuration
The following sections provide configuration information for the DHCP server.
DHCP server configuration navigation
• DHCP basic settings configuration parameters (page 146)
• DHCP global options configuration parameters (page 147)
• DHCP pool settings configuration parameters (page 147)
• DHCP pool options configuration parameters (page 148)
• DHCP host option configuration parameters (page 149)
• DHCP host IP settings configuration parameters (page 149)
• DHCP client access configuration parameters (page 150)
DHCP basic settings configuration parameters
The following section describes the parameters for configuration of DHCP basic settings located at
Configuration, DHCP, DHCP Server, Basic Settings
tab
.
Variable definitions
The following table describes the variables and values for configuring DHCP basic settings.
Variable Value
DHCP Server Select the DHCP server status.
Select Enabled to enable the DHCP server and process DHCP client
requests.
Select Disabled to disable the DHCP server and stop processing client
requests.
The default value is Enabled.
Blocked IP Address Re-use
Timer (seconds) Type the reuse timeout value used by the DHCP server.
This timer value represents the amount of time the DHCP server entity
waits for the DHCP request from the client before reusing the offer. The
value 0 disables the timer.
The value ranges from 1 to 120.
The default value is 5 seconds.
ICMP Echo Check for
Assigned IP Select the ICMP Echo status.
Select Enabled to enable the DHCP Server to probe for the IP address
before allocating the IP address to a client through the ICMP echo
message.
Select Disabled to automatically allocate the IP address.
The default value is Disabled.
Next Server Address Type the IP address of the next server.
Boot FileName Type the name of the boot file.
The default value is None.