Nortel BSG12aw 1.0, Руководство по настройке

Страница: 65 / 200

VPN configuration 65
Configuration Guide
4 In the PreShared Key field, type a string of text which is the key that VPN uses
to authenticate before receiving any other credentials.
5 Click Add .
End
Variable definitions
The following table describes the variables and values for configuring VPN global settings.
Configuring IKE
Complete the following procedure to configure the IKE pre-shared secret.
Prerequisites
• Before you modify a policy, you must set the Policy Status to INACTIVE.
Procedure steps
Step Action
1 From the BSG navigation pane, select Configuration, VPN, VPN Settings, IKE
Pre-shared Secret tab.
The VPN IKE pane appears.
2 Click the Policy Action , Create check box.
3 In the Policy Name field, type the policy name.
4 From the Interface Name list, select Fa0/9 .
5 From the Policy Status list, select ACTIVE .
6 In the IPSec Gateway IP Address field, enter the IP address if you configured
the Remote Identity as IPV4.
This is the same IP address you entered in Remote Identity Value on the VPN
Global Settings screen.
Variable Value
Remote Identity Type The user identity type that uniquely identifies the peer. Select one of the
following:
• IPV4 - specifies the IP address
• FQDN- specifies the fully qualified domain name (an unambiguous
domain name that denotes the position of the node in the DNS tree
hierarchy)
• EMAIL - specifies the email of the peer
• KEYID - specifies the string that uniquely identifies the peer
Remote Identity Value Type the value corresponding to the selected Remote Identity Type.
PreShared Key
Type a string of text which is the key that VPN uses to authenticate
before receiving any other credentials.