Nortel BSG12aw 1.0, Руководство по настройке

Страница: 33 / 200

WAN configuration 33
Configuration Guide
Variable definitions
This table describes the variables that appear on the T1/E1 Channel Group Configuration page.
Configuring the PPP interface
Complete this procedure to configure the PPP interface.
Procedure steps
Step Action
1 From the BSG navigation pane, select Configuration, WAN, T1/E1, PPP
Configuration .
The PPP Configuration pane appears.
2 From the Serial Interface list, select Serial1/1.
3 From the Authentication Required list, select YES or NO .
Your service provider will notify you if authentication is required.
4 From the Server/Client list, select Server or Client .
This is available only if authentication is required.
5 In the User Name field, type the user name.
If you selected Client, type the BSG user name.
If you selected Server, type the peer user name.
6 In the Password field, type the password.
If you selected Client, type the BSG password.
If you selected Server, type the peer password.
7 From the Link Type list, select Public .
8 Click Apply .
Variable Value
Channel Group This identifies an instance of channel
grouping on a T1 or E1 interface. The
format is Serialx/y where x is either 1 for
port 1 or 2 for port 2 and y is the Channel
Group Index.
Channel Group Index The Channel Group Index. This identifies
a grouping of channels on the T1
interface.
The range is 1to 64.
Interface This identifies which of the two T1/E1
interfaces on the BSG. Possible values
are t1e1-1 or t1e1-2.
Time Slot The time slots.
The range is 1to 24 for T1 and 2 to 32 for
E1.