Nortel BSG12aw 1.0, Руководство по настройке

Страница: 30 / 200

30 WAN configuration
NN47928-500 NN47928-500
Configuring the E1 interface
If your BSG is located in Europe, configure the E1 interface. This procedure guides you through
setting up one E1 interface.
Procedure steps
Step Action
1 From the BSG navigation pane, select Configuration, WAN, T1/E1 .
The T1/E1 Configuration pane appears.
2 Select interface 1.
3 From the Interface Type list, select E1 .
4 Reboot the system.
You must reboot the system before setting up the E1 parameters.
5 From the BSG navigation pane, select Configuration, WAN, T1/E1 .
The T1/E1 Configuration pane appears.
6 Select interface 1.
7 From the Framing list, select E1 or E1CRC .
The framing you set here must agree with the framing used by the peer.
8 From the Line Mode list, select CSU or DSU .
Line Length The Line Length value.
Line Length refers to the length of the
cable (in feet) that connects the devices
on each end of a T1 line.
Options:
0 - 133
134 - 266
267 - 399
400 - 533
534 - 655
The default value is 0 - 133.
You can configure the line length only
when the Line Mode is DSU.
Transmit ClockSource The clock source.
Options:
Local Timing—A local clock source is
used or an external clock is attached to
the box containing the interface.
Loop Timing — Recovered received clock
is used to transmit the clock.
The default value is Loop Timing.
Variable Value