Niveo NGSME48T4H Скачать руководство пользователя страница 83

Страница: 83 / 338

Chapter

3: Web Management

Security - Network - NAS (Network Access Server)

PoE Switch User Manual | 83

Guest VLAN Operation:

When a Guest VLAN enabled port's link comes up, the switch starts transmitting EAPOL

Request Identity frames. If the number of transmissions of such frames exceeds Max. Reauth.

Count and no EAPOL frames have been received in the meanwhile, the switch considers

entering the Guest VLAN. The interval between transmission of EAPOL Request Identity

frames is configured with EAPOL Timeout. If Allow Guest VLAN if EAPOL Seen is enabled,

the port will now be placed in the Guest VLAN. If disabled, the switch will first check its history

to see if an EAPOL frame has previously been received on the port (this history is cleared if

the port link goes down or the port's Admin State is changed), and if not, the port will be

placed in the Guest VLAN. Otherwise it will not move to the Guest VLAN, but continue

transmitting EAPOL Request Identity frames at the rate given by EAPOL Timeout.

Once in the Guest VLAN, the port is considered authenticated, and all attached clients on the

port are allowed access on this VLAN. The switch will not transmit an EAPOL Success frame

when entering the Guest VLAN.

While in the Guest VLAN, the switch monitors the link for EAPOL frames, and if one such

frame is received, the switch immediately takes the port out of the Guest VLAN and starts

authenticating the supplicant according to the port mode. If an EAPOL frame is received, the

port will never be able to go back into the Guest VLAN if the "Allow Guest VLAN if EAPOL

Seen" is disabled.

Port State

The current state of the port. It can undertake one of the following values:



Globally Disabled:

NAS is globally disabled.



Link Down:

NAS is globally enabled, but there is no link on the port.



Authorized:

The port is in Force Authorized or a single-supplicant mode and the

supplicant is authorized.



Unauthorized:

The port is in Force Unauthorized or a single-supplicant mode and the

supplicant is not successfully authorized by the RADIUS server.



X Auth/Y Unauth:

The port is in a multi-supplicant mode. Currently X clients are

authorized and Y are unauthorized.

Restart

Two buttons are available for each row. The buttons are only enabled when authentication is

globally enabled and the port's Admin State is in an EAPOL-based or MAC-based mode.

Clicking these buttons will not cause settings changed on the page to take effect.

Содержание NGSME48T4H



















































































































































































































































































































































Результаты поиска

Содержание NGSME48T4H

Отзывы:

Похожие инструкции для NGSME48T4H

Бренды по названию

Популярные бренды

Niveo NGSME48T4H, Руководство пользователя

Результаты поиска

Содержание NGSME48T4H

Отзывы:

Похожие инструкции для NGSME48T4H

Бренды по названию

Популярные бренды