Chapter
3: Web Management
IPMC - IGMP Snooping - VLAN Configuration
PoE Switch User Manual | 138
RV
Robustness Variable. The Robustness Variable allows tuning for the expected packet loss
on a network. The allowed range is 1 to 255, default robustness variable value is 2.
QI
Query Interval. The Query Interval is the interval between General Queries sent by the
Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds.
QRI
Query Response Interval. The Maximum Response Delay used to calculate the Maximum
Response Code inserted into the periodic General Queries. The allowed range is 0 to
31744 in tenths of seconds, default query response interval is 100 in tenths of seconds (10
seconds).
LLQI (LMQI for IGMP)
Last Member Query Interval. The Last Member Query Time is the time value represented
by the Last Member Query Interval, multiplied by the Last Member Query Count. The
allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in
tenths of seconds (1 second).
URI
Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions
of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds,
default unsolicited report interval is 1 second.
Buttons
Refresh:
Refreshes the displayed table starting from the "VLAN" input fields.
|<<:
Updates the table starting from the first entry in the VLAN Table, i.e. the entry
with the lowest VLAN ID.
>>:
Updates the table, starting with the entry after the last entry currently displayed.
Add New IGMP VLAN:
Click to add new IGMP VLAN. Specify the VID and configure
the new entry. Click "Save". The specific IGMP VLAN starts working after the
corresponding static VLAN is also created.
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved
values.
