NetApp FAS2600, Руководство пользователя

Страница: 679 / 786

Option 1: Add an X91148A module as a NIC module in a system with open slots
To add an X91148A module as a NIC module in a system with open slots, you must follow
the specific sequence of steps.
Steps
1. Shutdown controller A:
a. Disable automatic giveback:
storage failover modify -node local -auto-giveback
false
b. Take over the target node:
storage failover takeover -ofnode target_node_name
The console connection shows that the node drops to the LOADER prompt when the takeover is
complete.
2. If you are not already grounded, properly ground yourself.
3. Remove the target slot blanking cover:
a. Depress the lettered and numbered cam button.
b. Rotate the cam latch down until it is in a horizontal position.
c. Remove the blanking cover.
4. Install the X91148A module:
a. Align the X91148A module with the edges of the slot.
b. Slide the X91148A module into the slot until the lettered and numbered I/O cam latch begins to engage
with the I/O cam pin.
c. Push the I/O cam latch all the way up to lock the module in place.
5. Cable the module to the data switches.
6. Reboot controller A:
boot_ontap
7. Giveback the node from the partner node:
storage failover giveback -ofnode
target_node_name
8. Enable automatic giveback if it was disabled:
storage failover modify -node local -auto
-giveback true
9. Repeat these steps for controller B.
Option 2: Add an X91148A module as a storage module in a system with open slots
To add an X91148A module as a storage module in a system with open slots, you must
follow the specific sequence of steps.
• This procedure presumes slots 3 and/or 7 are open.
Steps
1. Shut down controller A:
a. Disable automatic giveback:
storage failover modify -node local -auto-giveback
false
b. Take over the target node:
storage failover takeover -ofnode target_node_name
677