NetApp FAS2600, Руководство пользователя

Страница: 587 / 786

Orange release button.
Core dump module cam handle.
a. Locate the failed module by the amber Attention LED on the front of the module.
b. Press the orange release button on the front of the core dump module.
Do not use the numbered and lettered I/O cam latch to eject the core dump module. The
numbered and lettered I/O cam latch ejects the entire NVRAM10 module and not the
core dump module.
c. Rotate the cam handle until the core dump module begins to slide out of the NVRAM10 module.
d. Gently pull the cam handle straight toward you to remove the core dump module from the NVRAM10
module and set it aside.
Be sure to support the core dump module as you remove it from the NVRAM10 module.
3. Install the core dump module:
a. If you are installing a new core dump module, remove the blank module from slot 6-1.
b. Align the edges of the core dump module with the opening in the NVRAM10 module.
c. Gently push the core dump module into the bay until the cam handle engages.
d. Rotate the cam handle until it locks into place.
585