Ness D16xD, Руководство по установке

Страница: 37 / 96

Home Arming by rADio key on/oFF bUttons
Setting this option on allows Home Mode arming by Radio Key ON or OFF buttons.
Note: This is independent of Home arming by AUX button if using the RK4 radio key.
PROGRAMMING SeQUeNCe:
P69e 5e toggles the option ON and OFF
oFF: radio Key Home Mode arming disabled
on: radio Key Home Mode arming enabled
OPeRATION:
- Press the radio Key oFF button twice within 4 seconds.
or.... - Press the radio Key on button twice within 5 seconds.
P69e 5e
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
OFF: Radio Keys cannot Arm Home
Mode.
notes
• Radio Key Home Arming will work
only if one or more zones have been
programmed as Home Zones (P51e).
• When using a Radio Keypad to Home
arm, ensure that the ARM ONly option
is OFF for the USeR CODe on the panel.
Otherwise further Home e keypresses on
the Radio keypad could AReA arm the
panel.
relAteD oPtions
P51e Program Home zones.
P64e 1e Brief Home alarm.
P64e 6e Strobe Flash on Home arm by radio
key
P69e 3e Quiet Home siren.
P69e 5e Home Arm by Radio Key.
P120e 2e Home arm chirps by Radio Key.
P120e 3e Radio Key AUX arms Home
Monitor.
P120e 6e Smart Beeps.
DisAble mAins FAil AlArm
When set ON, a Mains Fail alarm is: 1. Not displayed on the keypad, 2. Does not give
warning beeps, 3. Is not saved to MeMORy and the MeMORy display does not flash.
PROGRAMMING SeQUeNCe:
P69e 6e toggles the option ON and OFF
oFF: Mains Fail alarm operates normally
on: Mains Fail alarm is disabled
P69e 6e
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
OFF: Mains Fail alarm normal.
notes
This does not affect Dialler mains fail
reporting or saving to the History memory
or operation of the Mains Fail output on
the Output expander.
Does not apply to Navigator keypad.
See page 20 for Home operation.
beePs DUring exit DelAy - FUlly ArmeD moDe
This option gives an audible warning during exit Delay.
The sonalert will beep slowly during exit Delay when the panel is in exit delay (armed
by any Area). When the exit Time has 16 to 20 seconds remaining, the beeps will
change to a faster double-beep for the remainder of the exit Time. The end of exit Time
is announced by 3 beeps.
PROGRAMMING SeQUeNCe:
P69e 7e toggles the option ON and OFF
oFF: exit Beeps oFF
on: exit Beeps on
P69e 7e
Available in D8x/D16x V5.7 and later.
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
exit Beeps OFF.
relAteD oPtions
P28e exit Delay Time.
beePs DUring exit DelAy - Home moDe
This option gives an audible warning during exit Delay.
The sonalert will give a fast double-beep during exit Delay when the panel is in Home
Mode exit Delay. The end of exit Time is announced by 3 beeps.
PROGRAMMING SeQUeNCe:
P69e 8e toggles the option ON and OFF
oFF: Home exit Beeps oFF
on: Home exit Beeps on
P69e 8e
Available in D8x/D16x V5.7 and later.
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
Home exit Beeps OFF.
relAteD oPtions
P28e exit Delay Time.
NOTeS:
1. exit beeps cannot be stopped (i.e. by pressing a key on the keypad).
2. If another event causes a different keypad beep, the exit beeps resume once the
event beeps are finished.
37
NeSS D8X / D16X DelUXe CONTROl PANel – INSTAllATION MANUAl
P r o g r A m m i n g